


The DKW SB 200 manufactured in the DKW factory in Zschopau. The SB 200 had a single cylinder – two-stroke engine with a displacement of 192 cc
Two types of the SB 200 were built, the first version in the period from 1933 to 1936 and the second from 1936 to 1938. Luxury versions were also manufactured for the respective types.
| SB200 | |
|---|---|
| Operation | Two Stroke |
| Cylinders | 1 |
| Gears | 3 |
| Years of production | 1936-1938 |
| Overall production | ~20400 short version, 40000 long version |
| Dimensions (L × W × H, mm) | 1970 × 760 × 990 |
| Empty weight (kg) | 115–135, 140 luxury version |
| Displacement (cm³) | 192.3 |
| Power (hp) | 7 |
| Mixture | 1:20-1-30 |
| Top Speed km / h | 82-90 |
| Max RPM | 4000 |
| Compression | 1:5,8 |
| Gear Ratio 1st | 1: 2,75 |
| Gear Ratio 2nd | 1: 1,5 |
| Gear Ratio 3rd | 1: 1,04 |
| Translation from the engine to the transmission | 1: 2,62 |
| Translation from the gearbox to the rear wheel | 1: 2,32 |
| Total translation ratio | 1: 6.3 |
| Rim Dimensions front-Rear | 2¼x19 – 2½x19 |
| Tire Dimensions | 25×3 |
| Tyre pressure front-Rear | 1,25 – 1,35 |
| Brake Ø | 150/150 |
| Brake shoe width | 22/22 |
| Wheelbase | 1300 |
| Turning Circle | 4000Ø |
| Ground Clearance | 140 |
| Load Capacity (kg) | 180 |
| Tank Capacity (L) | 13 |
| Battery Make | Hoppecke bezw. F. &. W. bezw. Blitz |
| Battery Voltage | 6 |
| Spark Plug | Bosch DM 225/1 |
| Carburettor | AMAL 4/406 |
DKW SB200 Clutch Removal
DKW SB200 Clutch Cork Replacement
DKW SB200 Clutch Install
DKW SB 200 Ignition Timing Centrifugal Governor Removal
Is there information on this page which is incorrect or missing? Would you like to see further models added? If so your expertise is always welcome and you can contact us at: dkwmotorradersite@gmail.com
You can also help support DKWMotorrader.com as we grow and any donations are greatly appreciated. You can do so by clicking the image below. Thank you